1969 "Yenko" Chevrolet Camaro
for GTA: Vice City and GTA3

Created by: Juha "Turpuli" Laaksonen
Edited by : Jumpstyle for the GTA: Oldtimer Mod Coming soon...
e-mail: turpuli@mbnet.fi or turpuli@hotmail.com
website: http://storm.prohosting.com/turpuli/index.html
	 http://koti.mbnet.fi/turpuli  (in finnish!)

Release date: 13th December 2004


---------------------------------------------------
===================================================
============ INSTALLATION INSTRUCTIONS ============
===================================================
---------------------------------------------------
If you already know how to install the car, open readme.txd!


NOTE: you need DMagic1's wheelmod for this!
You can get it from Dmagic1's website:
http://dmagic1wheelmod.main-page.com/
or from any major GTA 3/VC site.

Recommended cars to replace:
in Vice City: sabretur
in GTA3: diablos

---------------------------------------------------
===================================================
=============== TABLE OF CONTENTS =================
===================================================
---------------------------------------------------
1. Car settings
  1.1. For Vice City
  1.2. For GTA3
2. Installation instructions for Vice City
  2.1. Installing mesh and textures (.dff and .txd)
  2.2. Installing car settings
  2.3. Installing collision file (.col)
3. Installation instructions for GTA3
  3.1. Installing mesh (.dff)
  3.2. Installing textures (.txd)
  3.3. Installing car settings
  3.4. Installing collision file (.col)
4. Stuff



---------------------------------------------------
===================================================
=============== 1. Car settings ===================
===================================================
---------------------------------------------------

===================
1.1. FOR VICE CITY:
===================


handling.cfg:
 
1400.0 2.1 5.0 1.8 0.0 0.1  -0.1  70  0.95 0.8 0.52 5 300.0 33.0 R P 6.0  0.55 0 23  1.11  0.07  0.34  0.5 40000 0.19 -0.09  0.5  0.4		1000102		1  1


The last two fields of default.ide:

249, 0.75


carcols.dat:

7,71, 19,82, 20,72, 39,73, 41,47, 70,82


==============
1.2. FOR GTA3:
==============


handling.cfg:

1400.0 2.1 5.0 1.8 0.0 0.1  -0.1  70  0.95 0.8 0.52 5 300.0 33.0 R P 6.0  0.55 0 23  1.11  0.07  0.34  0.5 40000 0.19 -0.09  0.5		0102		1  1


The last two fields of default.ide:

089, 0.75


carcols.dat:

7,71, 19,82, 20,72, 39,73, 41,47, 70,82


---------------------------------------------------
===================================================
=== 2. Installation instructions for Vice City ====
===================================================
---------------------------------------------------

You need these programs:

- Notepad (or any other text editor)

- IMG Tool
  you can find it from any major GTA 3/VC site
  (for example: gta-action.com, www.theborggaming.com)

- Steve-M's CollisionFileEditor
  Get it from Steve's homepage:
  http://people.freenet.de/steve-m
  or any other colfile editor (no instructions for
  them here, though)

Of course you can choose not to install the new
collision files but that's not recommended.


NOTE:
REMEMBER TO BACK UP THE ORIGINAL FILES BEFORE INSTALLATION!
And remember to uncheck "read only" for the entire GTA VC
folder and every file in it.


In this little guide I'm using sabretur as an example.
You don't have to replace sabretur if you don't want to.
You can replace any car with this if you use the new
collision file!


==================================================
2.1. Installing mesh and textures (.dff and .txd):
==================================================

1. Open IMG Tool.  Open gta3.img with it.
   (File > Open)
   The gta3.img is located in "GTA VC/models"

2. Back up sabretur.dff and sabretur.txd by extracting them.
   (Edit > Find / Find Next)
   (Commands > Extract)
   Then delete sabretur.dff and sabretur.txd from the .img
   (Commands > Delete)

3. Add sabretur.dff and sabretur.txd from the folder where
   you have unzipped the zip file.
   (Commands > Add)


Done!


=============================
2.2. Installing car settings:
=============================

1. Back up handling.cfg, default.ide and carcols.dat
   They are located in "GTA VC/data"

2. Open handling.cfg in Notepad.  Search for sabretur.  Replace the
   line of numbers between words "SABRETUR" and "PHEONIX" with the
   line above.  (look at 1. Car settings > GTA VC > handling.cfg)

3. Open default.ide in Notepad.  Search for sabretur.  Replace the
   two last fields in the line (by default: 253, 0.7) with these:
   249, 0.75
   (249 is the id number of the wheel and 0.75 is the size of the wheel)

4. Open carcols.dat in Notepad.  Search for sabretur.  Replace the
   numbers with these: 
   7,71, 19,82, 20,72, 39,73, 41,47, 70,82

Done!


======================================
2.3. Installing collision file (.col):
======================================

1. Back up vehicles.col.
   It's located in "GTA VC/models/coll"

2. Open Steve-M's Collision File Editor.  Load vehicles.col in it.
   (File > Load)

3. Search for sabretur and then click it.  Now click "Replace" on the
   right.  (or Coll > Edit > Replace)
   Find and open 69camaro.col.

4. Now you should have a new box titled "Replace Collision Object"
   in front of you.  Select the only item on the list and click
   "Replace".

5. Save.  (File > Save)

Done!
Now you have everything installed!  Just run GTAVC and enjoy!  ;)